Download Technical Information Request a quote Find your nearest support center

R180 (wireless)

r180The Wireless Wind Speed Indicator R180 measures and clearly indicates the wind speed to the crane operator. The system has an adjustable maximum wind speed limit.

A visual and audible alarm works with direct sequence spread spectrum transmission technology for an enhanced range of operation and better RFI resistance. The internal antenna in the switch and display is a unique RaycoWylie design that increase durability and provide less failures and downtime than systems with an external antenna.

This wind speed indicator uses lithium batteries that last up to two years and take less than 30 minutes to install.

Contact us today to know more about this product!

Features and benefits
  • Long lasting lithium batteries (Up to 2 years)
  • User friendly
  • Easy installation and sensor replacement
  • Internal antenna on both the display and sensor, wich means low susceptibility to damage and less downtime.
  • Calibrated before shipment.
  • Low battery warning for sensor.
  • Easy to read and weatherproof display.
  • Audible and visible alarms on the display.
  • Fast and easy sensor replacement without a complete system calibration.
  • Direct Sequence Spread Spectrum transmission technology for an enhanced range of operation and better RFI resistance (2,4GHz Transceivers).
Technical Data
  • Display Size: 4,72" X 3,13" X 3,50"
  • Alpha-Numerical Display Format: Big/Easy reading 20x35mm
  • Display & Sensors Sealing: IP67
  • Supply Voltage: 12 to 24 VDC (Max: 10,2 to 30 VDC)
  • Operating Temperature: -20°C to 70°C
  • ODigital Output: External motion eut relay or alarm (max 500mA)
  • Batteries: Primary lithium-thionyl chloride / 3,6V /19Ah

 

Click here to download the PDF file

 

Back to cranes products



Download Technical Information Request a quote Find your nearest support center

R147 (radio)

The R147 wireless Anti-Two-Block system is a device that warns the operator upon an impending two-block situation. The R147 provides an audio and visual alarm when the hook reaches the maximum safe height to the boom tip. It has been designed to fit on almost all types of cranes. The system uses standard ¨AA¨ lithium batteries, making it easier and faster it replacement.

This wireless Anti-Two-Block system comes pre-calibrated and works with direct sequence spread spectrum transmission technology for an enhanced range of operation and better RFI resistance. The internal antenna in the switch and display is a unique RaycoWylie design that increase durability and provide less failures and downtime than systems with an external antenna. This system takes less than 30 minutes to install.

Contact us today to know more about this product!

Features and benefits
  • Direct Sequence Spread Spectrum transmission technology for an enhanced range of operation and better RFI resistance. [2.4 GHz Transceivers)
  • Internal antenna on both the display and sensor, which means low susceptibility to damage and less downtime
  • Display and switch pre-calibrated by the manufacturer R147
  • Display can monitor up to two switches
  • Easy installation and sensor replacement
  • Uses standard AA lithium batteries
  • Up to 1 year battery life [low battery warning)
  • User-friendly display
  • Audible and visual warning in case of two-block
  • Operating range: - Outdoor / line of sight 1 mile - Indoor / Urban 400 feet
  • CE, OSHA and FCC Compliant
Technical Data
  • Display Size: 4,69" x 3 ,13" x 2,13" [11,95 x 7,90 x 5,55 cm)
  • Display & Sensor Sealing: IP67 rating for display and sensor
  • Supply Voltage: 12 to 24 VDC [ Max: 10,2 to 30 VDC)
  • Operating Temperature: -4° F to 158° F (-20° C to 70° C)
  • Digital Output: External motion cut relay or alarm [max 500mA)

Click here to download the PDF file

Back to cranes products



Download Technical Information Request a quote Find your nearest support center

W835

w835The Wylie Boom Angle Indicator puts accurate boom position information where a crane operator needs it – in the operator’s cab. The high and low angle warning feature is very helpful when operating a crane under power lines or when carrying out repetitive operations.

    The w835 is suitable for all types of cranes.

Features and benefits
  • Clear digital display: The back lighted digital display is easy to read day or night.
  • Settable angle limits: Limits parameters are set by adjusting the high and low angle limits while they are displayed in the digital window. Once set, the limits stay in memory until new limits are set.
  • Audible and visual warning systems: Anytime the displayed boom angle falls outside the range defined by the limit settings, a red high or low limit light and a buzzer are activated.
  • Simple, reliable electronic system. The signal from a pendulum/pot sensor is translated into a digital readout by solid state electronics.
  • Easy installation. The compact metal policarbonate display easily mounts inside an operator’s cab and the weatherproof angle sensor can be mounted on either side of the boom. A connecting cable with plug-in connectors is standard equipment.
Technical Data
  • Digital Display: 1/2" X 2" 4 digits LCD display with backlight
  • Display accuracy: + - 2%
  • Settable limits: Independant high and low angle limit settable between Low : -90° and 89°, High : 0° to 189°
  • Visual warning: High or low red LED's illuminate whenever either limit is passed
  • Audible warning: Buzzer sounds whenever either limit is passed
  • Power requirements: 10 to 40 Volts DC
  • Fuse: 1 Amp
  • Current drain: 175 mA at alarm
  • Temperature range: -22° to 140° F
  • Enclosures: Display: Polycarbonate, Angle sensor: 14-gauge steel
  • Interconnecting cable: Three-conductor cable with PVC external protection 35' long with plug-in connectors (longer connectors are available upon request)

Back to cranes products

Product pictures